ZenduCam - Installing Replacement SD Cards / SIM Card

Installing Replacement SD Cards / SIM Card

Take out the Dashcam (power-off), and use the special Allen key provided to you on installation to open the card slot panel on the right of the Dashcam by turning counterclockwise. (If you do not have this key, please contact support@gotrackcam.com so we can send it to you.)

Install SIM card and/or Micro SD card as shown in the figure below (pay attention to the insertion direction of the cards).

Once you hear the click sound when pushing in the cards completely, it indicates that the cards are installed in the correct direction; if there is obvious friction resistance during installation, it indicates that the installation direction is wrong. Take out the cards in time to avoid any damage to the cards and the card holder. Make sure the cards are seated properly and the panel door is completely shut and screwed tight.

TF #1 = SD card storage (64GB, 128GB, or 256GB)

TF #2 = SD card storage (64GB, 128GB, or 256GB)