Adding a 3rd Camera in Veyes

Step 1: Download the Veyes app on your mobile device: for iOS / for Android

Step 2: Click the black button on the camera twice to enable Wi-Fi

Step 3: Connect to the camera's Wi-Fi on your mobile device

**The camera's Wi-Fi name will be the serial number on the camera, that you can find on the side.

 

Step 4: Once your mobile device is connected to the camera's Wi-Fi, you can open the Veyes app.

 

                                                           

Step 5: You will click on "Preferences" in the top right corner.

Step 6: After clicking the "Preferences" tab, this window will be displayed. Next, you will click on "Surveillance" (1) listed in the tabs shown on the left side. Then, you will click on "Record" (2).

 

Step 7: After clicking on the "Record" tab, you will then press the "Main Stream" (1) tab located in the middle section. Then place a check mark in the Camera 3 box (2). Adjust the Resolution, Frame Rate, and Quality selections to match Channel 2. Repeat this step to enable additional installed cameras if applicable.

Step 8: After enabling Camera 3, you will scroll down on the same screen and press "Save" and "OK"